Bộ Vòi Phun Và Dụng Cụ Vệ Sinh Cho Máy In 3d

Giới thiệu Bộ Vòi Phun Và Dụng Cụ Vệ Sinh Cho Máy In 3d

Extruder Nozzle:Come with 6pcs 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm nozzles, high quality brass material, m6 thread. Compatibility for Anet A8, Creality CR-10, Tevo Tarantula, MK8 makerbot, duplicator, prusa i3 and reprap printer.
Pratical Wrench:Set include 1 flat wrench which open mouth width is 17mm, a 7mm socket fit for nozzle, a mini socket wrench and a handle for you to change out a nozzle. They will fimly hold and without damage to the heat block, no yanking on frail wiring.
Cleaning :Come with 18pcs 0.2mm, 0.6mm, 0.8mm, 1mm cleaning , each for 2pcs, 0.4mm for 10pcs. They are stored in 2 round tube. Which are used for cleaning 3D Printer nozzles and soe the filament clog problem, remove excess filament quickly.
Nozzle thread: M6
7mm screw socket fit for nozzle
17mm wrench fit for 16x16mm heat block
How to change the nozzle:
Prepare the nozzle, spanner, wrench.
Heating. Turn on the 3d printer, set the nozzle temperature to target (PLA: 80-220, ABS: 240-280).
Removing. After the heat done, use spanner to hold the heat block firmly, then use the wrench to screw old nozzle out.
Adding. Put new nozzle to the socket and screw nozzle in, make sure the screw in tight and the work done.
Warm Prompt: When heating, the old nozzle will be very hot, please do not Press them by hands.
colour:Photo Color
Material:brass
Package Contents:
1* 17mm flat wrench
1* Dual head socket wrench
1* 7mm socket
1* Handle
1* 0.2mm extruder nozzle
1* 0.3mm extruder nozzle
2* 0.4mm extruder nozzle
1* 0.5mm extruder nozzle
1* 0.6mm extruder nozzle
1* 0.8mm extruder nozzle
2* 0.2mm cleaning
10* 0.4mm cleaning
2* 0.6mm cleaning
2* 0.8mm cleaning
2* 1mm cleaning
1* TweezerOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Giá $ALPHA