Support ie, serial port, wireless configuration network card configuration parameters.
Support the adhoc function, do not router directly with smartphones like iphone and google, and seamlessly connect with 8/16/32-bit mcu.
Support wifi full encryption mode.
Support tcp, udp transparent transmission mode
N support 802.11 b-only, 802.11 b/g mix
N supports 1~13 channels
N support 1m, 2m, 5.5m, 6m, 9m, 11m, 12m, 18m, 24m, 36m, 48m, 54m transmission rate
N support network scan
N support for joining indra network
N supports the creation/accession to the adhoc network
N support open/wep64/wep128/ccp/tkip/wpi encryption mode
N support for open/wep/wpa/wpa2/wai accreditation
N support for ssid networking only
N support binding cssid networking
N support user active control networking through at+instruction
N support transparent mode transmission
N support automatic networking using configuration parameters
N supports energy conservation (close rf mode in standby)
N supports antenna selection (select antenna type according to configuration parameters and do not support dynamic switching)
2.1.2 network functions
N support tcp/ip protocol
2 ip agreement
Support segment crossing (by setting gateways and subnet mask)
Receiving and sending sub-paragraphs not supported
2. arp agreement
Support receipt of arp requests and response
Support the sending of arp requests and receiving responses
2 icmp agreement
Support receiving ping requests and responding to them
Support sending ping requests and receiving responses
Ping requests with a length greater than 1460 are not supported
2 tcp agreement
Support client model
Support server mode, each server can only access one client
Support up to n socket (1 for web remote management and n-1 for users)
(note: n to be determined)
2 udp agreement
Support server mode, only for receiving
Support client mode for sending only
Support up to n socket
Support broadcast address
2 dhcp agreement
Support automatic access to ip address as client
N support http protocol
Built-in an http server for remote web management.
N dns agreement
Support client.
2.1.3 user interface function
N user interface type
2 physical serial port
2 data format
Data bits: 5/6/7/8
Diskontinued: none/1/1.5/2
Parity test: none/odd/even
Hardware control flow control: none/yes
2 bot rate
Support to commonly used 1200/2400/4800/9600/19200/38400/57600/115200bps
N command mode
After the module is electro-initialized, enter command mode, which only receives and responds to at+instructions.In this mode, the user can perform various control operations on the module through the at+instruction set.
Using at+instructions, you can move from command mode to transparent mode.
N transparent model
This mode is data transmission state, all input and output data (except escape characters) are transparent transmission processing, the module serves only as a data link between seria