Bộ Điều Khiển Từ Xa Không Dây Shiwaki 12v 1ch

Máy tính & Laptop > Linh Kiện Máy Tính > Khác || Bộ Điều Khiển Từ Xa Không Dây Shiwaki 12v 1ch
  • Giao hàng toàn quốc
  • Được kiểm tra hàng
  • Thanh toán khi nhận hàng
  • Chất lượng, Uy tín
  • 7 ngày đổi trả dễ dàng
  • Hỗ trợ xuất hóa đơn đỏ

Giới thiệu Bộ Điều Khiển Từ Xa Không Dây Shiwaki 12v 1ch

Description:
The 12V one channel learning code remote control switch is suitable for the electrical control circuit of anti-theft alarm, remote control electric door and window, signal control, industrial control and lifting equipment,etc.
Remote control switch module relay contact independent output, it suitable for direct control of various types of load; it using learning code wireless coding technology (space code), no direction, the switch does not interfere with each other.
Fast response and long control distance, Stable performance and strong to resist interference, not obstructed by walls and furniture
Safety, with fire-retardant material shell
Energy-saving and environment protection
Easy to install, just wire connection, simple to use

Specification:
Operating voltage: DC 12V
Static operating current: ≤10mA
Working temperature: -40°C—+80°C
Receiver sensitivity: ≥ -95dB
Working frequency: 433MHZ
Output current: ≤10A
Working mode: point action, self-locking, (adjustable)
Output method: contact output (controllable AC and DC)

Wiring instructions:
+ V: 12V + input;
- V: 12V - input;
NO: output, normal open circuit, normally open end of relay;
COM: output, common, relay commons;
NC: output, normally closed, normally closed relay.

Clear code function:
First, the controller is connected to the line. After power on. Press the learning button on the controller for 8 seconds, then automatically clear all remote control learning code. After the clear, the remote controller that had previously learned to pass the code will no longer be controlled.

Operating mode:
1. Jog mode: press the remote control relay to pull, release the remote control relay is disconnected;
2. Self-locking mode: Press the remote control relay to pull in, then press again the remote control relay to disconnect;
3. Interlock mode: Press the remote control A button, the relay pulls in, and then press the remote control B button, the relay is disconnect

Learning code function:
1, jog learning method: Press the controller code button once, the LED indicator will flash 1 time. After the LED indicator lights up, press the remote controller key that needs to learn, the control panel LED indicator will flash 3 times continuously. The learning is successful.

2, self-locking learning method: Press the controller code button twice. The LED indicator will flash twice. After the LED indicator lights on, press the remote control key that needs to learn. The control panel LED indicator will flahs 3 times continuously. The learning is successful.

3, learning methods: Press the controller code button three times. The LED indicator flashes three times. After the LED indicator is on, press the remote control key that needs to learn. The control panel LED indicator flashes three times continuously. The learning is successful.

Package Includes:
4 Pieces Remote Control Switch (With Shell)
1 Piece Remotes
Giá ETP
Liên kết: [1+1] Set 2 tuýp kem dưỡng phục hồi da Dr. Belmeur Advanced Cica Hydro Cream (60ml+40ml)